top of page

St.George Healthcare Group

Public·76 members

Gilat Sat Modem 180 Driver


Download ->>> https://urlin.us/2twabn





How to Use Gilat Sat Modem 180 for Vehicle Communication


Gilat Sat Modem 180 is a vehicle interface for customers who use TCP/IP protocol to communicate data between computers. It is compatible with Gilat Satellite Networks' GLT-1000 modem, which delivers high-speed, high-availability and bandwidth-efficient satellite connectivity for on-the-move, point-to-point or point-to-multipoint operations.


In this article, we will explain how to use Gilat Sat Modem 180 for vehicle communication, including the installation, configuration and troubleshooting steps.


Installation


To install Gilat Sat Modem 180, you will need the following components:


Gilat Sat Modem 180 unit


Power cable


Ethernet cable


Antenna cable


Vehicle antenna


GLT-1000 modem


Laptop or PC with TCP/IP protocol enabled


The installation steps are as follows:


Mount the Gilat Sat Modem 180 unit securely inside the vehicle, away from direct sunlight and heat sources.


Connect the power cable to the Gilat Sat Modem 180 unit and to a 12V DC power source in the vehicle.


Connect the Ethernet cable to the Gilat Sat Modem 180 unit and to the laptop or PC.


Connect the antenna cable to the Gilat Sat Modem 180 unit and to the vehicle antenna.


Connect the GLT-1000 modem to a power source and to the satellite network.


Turn on the Gilat Sat Modem 180 unit and the GLT-1000 modem.


Configuration


To configure Gilat Sat Modem 180, you will need to access its web interface using a web browser on your laptop or PC. The default IP address of Gilat Sat Modem 180 is 192.168.1.1. The default username and password are admin and admin respectively.


The configuration steps are as follows:


Login to the web interface of Gilat Sat Modem 180 using your web browser.


Go to the Network Settings tab and enter the IP address, subnet mask, gateway and DNS server of your satellite network. Click Save.


Go to the Satellite Settings tab and enter the satellite name, frequency, symbol rate, polarization and modulation of your satellite network. Click Save.


Go to the Status tab and check if the Gilat Sat Modem 180 unit is connected to the satellite network. You should see a green light next to Satellite Link Status.


Troubleshooting


If you encounter any problems while using Gilat Sat Modem 180, you can try the following troubleshooting steps:


Check if all the cables are connected properly and securely.


Check if the power source of Gilat Sat Modem 180 and GLT-1000 modem are working properly.


Check if the IP address of Gilat Sat Modem 180 is correct and not conflicting with other devices on your network.


Check if the satellite settings of Gilat Sat Modem 180 are correct and matching with your satellite network.


Check if your laptop or PC has TCP/IP protocol enabled and configured correctly.


Restart Gilat Sat Modem 180 and GLT-1000 modem and try again.


If you still have problems, you can contact Gilat Satellite Networks' customer support at https://www.gilat.com/contact-us/. aa16f39245






About

Welcome to the group! You can connect with other members, ge...
Group Page: Groups_SingleGroup
bottom of page